Reinhardt Auction Service
Work Hard, Sell Right!

TENGWALL

LOGGING/TREE SERVICE RETIREMENT AUCTION

Weds. May 23, 2018- 10:00 am
Kevin Tengwall; Owner

Retiring and discontinuing logging, so will sell the following at auction. Located on S edge of Brainerd, MN, Old Hwy 371 and Thiesse Rd., 2 miles E, or from State Hwy 25, W ¾ of mile on Thiesse Rd.

 11498 Thiesse Rd.
Brainerd, MN 56401

 Toby’s Concessions.

Kevin cell: 218-820-5498 with questions regarding equipment.

Not many small items, will start on shop items at 10:00 a.m. Equipment and larger items at 11:00 a.m.

LOGGING EQUIPMENT

APPROX. 1996 TIMBERJACK 618 FELLER-BUNCHER, w/24-In. Hotsaw, Meter reads 13,568 hours

Hydroax 511B, 5.9 Cummins, Rebuilt Engine w/Approx. 200 hours, w/20-In. Shear, 80% Rubber, Meter reads 7,000 hours, SN: 1969

JOHN DEERE 748E GRAPPLE SKIDDER, Dual Arch, w/Factory JD Engine w/Approx. 2,500 hours, Meter reads 21,247 hours, Usable rubber, SN: 549657

Caterpillar 525 Grapple Skidder, 75% Rubber, Meter reads 10,200 hours

Timberjack 208 Cable Skidder, 353 Detroit Engine, Older and usable

Barco 160A Loader Mounted on Semi-5th-Wheel Trailer, w/5.9 Cummins Engine, Joystick Controlled, w/60-In. Siro Slasher

Slasher, Side Slide Type

2002 Vermeer BC1800 A brush chipper, Perkins diesel motor, 18" chipper with hydraulic feed, good condition. New belt and tensioner 20 hrs ago 

JOHN DEERE 250 SKID LOADER, Foot Controls, w/Bucket, 2 New Tires, New Hyd. Pump, Approx. 30 hours ago, 3,256 hours, Clean, SN: KV0250A251003

Steel Tracks Fit JD 250 Skid Loader and Others, Approx. 50%

Rayco 1620 junior stump grinder has the green teeth but needs a motor

Kenworth sleeper

Barko 40 on the 70's white with a 250 Cummins motor no title , good Motor 

Wayne Chipper, For parts/repair

3 Sets of Skidder Chains

 LOADERS AND TRUCKS

1993 KENWORTH J600 LOADER TRUCK, N14 Cummins, Super 10-Sp., 21-Ft. Bed, Twin-Screw, w/Lemco 8000 Loader, Good Rubber, Clean w/high miles

1993 Freightliner Semi-Tractor, w/Short Sleeper, Twin-Screw, 12.7 Detroit Diesel, 9-Sp., Sound w/high miles

1980 Ford F800, 370 Gas, 5- and 2-Sp., 12-Ft. Contractor Dump Box, Good Rubber, Sound Body, 62,868 miles

1994 Ford Super Duty 1-Ton Dually, 7.3 Turbo Diesel, 2WD, Manual 5-Sp., w/PTO Hyd. Dump Box w/Side Extensions

1989 GMC 7000, 366 Gas, 5-Sp., w/Flatbed, Very sound body and new paint, 44,175 miles

Barco 80 Loader, on Older Truck, (Was used w/slasher) w/Mounted 4BC Cummins Power Unit

1972 White Truck w/Barco 40 Truck-Mount Loader, Truck is not road worthy-NO TITLE

1981 Ford F600 Truck, Detroit 8.2 Diesel, 4- and 2-Sp., for parts w/Hyd. Dump Chipper Box

1999 Dodge Durango SLT, High miles

1973 Bucket Truck, Parts/repair, with ’73 GMC 4x4 Chassis and 48-Ft. High Ranger Bucket

Heil Dump Truck Box, 10-Ft. w/Cylinder and Hyd. Power Up and Down

Truck Frame w/Ford 8.1 L Diesel Engine, for parts

Two 5.9 Cummins Engines, Rebuildable

Two 353 Detroit Engines, For parts 

Kenworth Dbl. Bunk Stand-Up Sleeper with Diesel Heater

TRAILERS

1997 FLATBED W/LOG STAKES, 48-FT. W/SPREAD AXLE

1978 Semi-5th-Wheel Bunk Trailer, w/Rear Gate, 40-Ft.

1966 Fruehoff Lo-Boy Equipment Trailer, Triple Dual Axle, 32-Ft. Semi-5th-Wheel, Older model

1993 Factory 17-Ft. Pup Trailer

4 Log Trailer Bunks

Two Air Lift Tag Axles, w/16” Alum. Dual Wheels

SHOP

Super Max Metal Lathe, Gear Drive, w/Handle 36-In. Stock

Two Miller Industrial 3-Phase Welders, One w/Cobra Wire-Feed Control Head

Large Commercial Port. Air Compressor, 4-Cyl. 

4-Cyl. WI Engine, Used as Power Plant

2-Cyl. WI Engine, Parts/repair

Fiberglass Mechanics Utility Box, Fits 2 ½-Ton Truck

 Two Pickup Box Fuel Tanks w/Pumps, One is Square 105-Gal., One is “L” Shaped 54-Gal.

MANY PRO-GRADE CHAINSAWS: Including Stihl O20, O44, 460, O46, 192, Husqvarna 372, and Others

Hyd. Pole Saw

Echo Power Pruner

2 Heavy Duty Ext. Ladders

Sev. Pallets of Equipment and Truck Parts; Asst. Truck Wheels and Tires; Large Asst. of Shop Tools, Equipment, Hardware, Accessories-Many Pallets